Cable Containment Systems

Cable Trunking Systems
  • Cold rolled steel sheet to JIS G3141 SPCC SD/Hot-Rolled steel sheet to JIS G3131 SPHC, Hot-dip galvanized BS EN ISO 1461 (BS 729) after fabrication.
  • Cold rolled steel sheet to JIS G3141 SPCC SD/ Epoxy Powder Coat with minimum film thickness 45um after fabrication.
  • Electro-galvanized steel sheet to JIS G3313 SECC equivalent to BS EN 101152 with Epoxy Polyester Powder Coating with minimum film thickness 45um after fabrication.
  • Pre-galvanized zinc coated steel JIS G3302 equivalent to BS EN 10142 (BS 2989) with a minimum coating designation of G275.(BS EN 10142 supersedes BS2989).
  • Stainless Steel Sheet to SUS 304, SUS, 316. AISI type 304 or AISI Type 316.

 

 

Perforated Cable Tray Systems

Material & Finishes

  • Cold rolled steel sheet to JIS G3141 SPCC SD/Hot-Rolled steel sheet to JIS G3131 SPHC, Hot-dip galvanized BS EN ISO 1461 (BS 729) after fabrication.
  • Cold rolled steel sheet to JIS G3141 SPCC SD/ Epoxy Powder Coat with minimum film thickness 45um after fabrication.
  • Electro-galvanized steel sheet to JIS G3313 SECC equivalent to BS EN 101152 with Epoxy Polyester Powder Coating with minimum film thickness 45um after fabrication.
  • Pre-galvanized zinc coated steel JIS G3302 equivalent to BS EN 10142 (BS 2989) with a minimum coating designation of G275.(BS EN 10142 supersedes BS2989).
  • Stainless Steel Sheet to SUS 304, SUS, 316. AISI type 304 or AISI Type 316.
  • Aluminium to AA5052-H32, 1100-H14, 3003-H14, 5052-H32, 6061-T6.

 

 

Cable Ladder Systems

Material & Finishes

  • Cold rolled steel to JIS G3141 SPCC SD/Hot-Rolled steel sheet to JIS G3141 SPHC, Hot-dip Galvanized BS EN 1SO 1461 (BS 729) after fabrication.
  • Cold rolled steel sheet to JIS G3141 SPCC SD/Epoxy Powder Coated with minimum film thickness 45um after fabrication.
  • Stainless Steel sheet to SUS 304, SUS, 316. AISI Type 304 or AISI Type 316.

 

   

Rigid Flexible Conduits

Material & Finishes

  • Made of high quality mild steel strips with superior bending and forming properties.
  • Manufactured by cold forming and high frequency welding.
  • Internal surface is galvanised for easier wire pulling and pushing.
  • Threaded on both end to be fitted with galvanized couplers
  • Easier to cut, thread, bend and pull wire.
  • Dimensionally accurate. Uniform quality in every aspect.

 

 

Floor Trunking Systems

Flush Floor Trunking

Material & Finishes

  • Cold rolled steel sheet to JIS G3141 SPCC SD/Hot-Rolled steel sheet to JIS G3131 SPHC, Hot-dip galvanized BS EN ISO 1461 (BS 729) after fabrication.
  • Pre-galvanized zinc coated steel JIS G3302 equivalent to BS EN 10142 (BS 2989) with a minimum coating designation of G275. (BS EN 10142 supersedes BS2989).
  • Stainless steel sheet to SUS 304, SUS, 316. AISI type 304 or AISI type 316.

Service Outlet Box

Raised Floor Box Consists of the following components:

  • Basic Outlet Frame.
  • Polyamide Frame and confine with 2.5mm steel sheet in fill.
  • Epoxy-Polyester Powder Coated service and Data outlet Panel.

1.  Raised Floor Outlet Box

Consists of 1 unit non-combustible metal frame

Box Base – manufactured from Pre-galvanized Zinc Coated steel sheet to JIS G3302 equivalent to BS EN 10142 (BS EN 10142 supersedes BS2989) with suitable knockout for conduit connection.

2.  Frame and trap with Steel lid Affix

Frame and portable lid interleaves with 2.5mm strengthen steel sheet with 7mm carpet recess. Trap is fully overturned without removing the frame thus makes cable way be available in four directions (optionally).

Light grey colour Frame and needed parts are moulded from engineering plastics (Nylon 66) that provide mechanical strength, impact and fire resistance.

3.  Epoxy-Polyester Powder Coated Service Outlet Box

Standard services outlet panels will be provided for each set of Raised Floor Outlet Box sold.

Service Outlet panels suitable for powder; voices and data are fabricated from cold-rolled steel sheet with epoxy – polyester powder coated and additional service outlet panels are also available upon request.

   

Strut Support Systems

LanRic offers a comprehensive metal framing system that conforms to BS 6946:1988 (Metal Channels cable Support Systems for Electrical Installations)
Flexibility of elements of the system can be combined to create an unlimited range of structural designs.

  • Rigidity of easily assembled rigid structures can be created without the need for drilling and welding.
  • Adjustability of position of components can be easily adjusted & structures can be demounted and components reused.
  • Competitiveness & high strength to weight components and ease of assembly make this a cost effective solution to support structural requirements.
  • It has many applications for structural support of mechanical as well as electrical services in a wide range of industries and construction projects.

  • Wiremesh Cable Tray Systems
  • Raceways for Fibre Optics and telecommunication cables
  • Boxes